Products
Hot melt units
Hot melt units ensure the necessary glue supply. Depending on the application gear- and pistonpump units, drum- and bag melters are available. A hotmelt unit together with hot melt hoses and guns are forming a complete hot melt application system.
read more ...
Cold glue delivery units
Cold glue delivery units continuously deliver liquid glue. Our large range of delivery units puts the right pressure to your glues - exactly and reliable.
read more ...
Hot melt guns
Hot melt application guns apply thermoplastic glues. For this we produce a variety of single and multiple guns for dot,- line,- stripe,- and spray application. Everything is possible. Demanding customers requirements are our specialty.
read more ...
Cold glue application guns
The right gun for your application. Extremly fast switching electro-magnetic application guns for a fine dot or line application as well as rugged electro-pneumatic application guns for maximum glue pressure up to 200 bar ensure the highest possible level of production safety.
read more ...
Controller
The controllers of Reuther-Systems activate e.g. cold glue or hot melt application guns. During serial production the same glue pattern is applied on each product. At the push of a button, already recorded glue pattern can be released. Depending on the requirements different controllers are available.
read more ...
Accessories
The right accessory for perfect glueing.
For the current machine manufacturers we supply various brackets for the installation of glue guns, different encoders, photocells and initiators.
read more ...
Second hand offers
Up-to-date overview of second hand, overhauled components with warranty.
read more ...
Hot melt delivery units
Hot melt delivery units serve to melt and deliver thermoplastic hotmelts (EVA, PUR, polyamid, polyester, polyolefinen etc.)
Our hot melt products are solid and reliable, the components fit perfectly together and enable an optimal production.
Extensiblity
Our technology enables an extreme economical system configuration.
Therefore further solutions can be added later.
Connecting components of our competitors
Thanks to special parts the mechanical connection as well as the electronical data exchange between our components and those of our competitors are possible without problems.
Of course we also take care of the maintanance as well as the service and we deliver the necessary spare parts.
Piston pump units
- Tank capacity 4 liters to 50 liters
- 1 to 16 hose connections
- Filter on the side of the pressure
- Capacitive level control
- Pneumatic pressure release
- Soft Touch operating panel
- Rugged sheet steel case
- Double filtration of the inlet side
- Modular electronic system - optionally extensible
- High quality non-stick coating of the tank
Gear pump units (5 and 10 liters)
- Tank capacity 5 liters to 10 liters
- 1 to 8 hose connections
- 1 gear pump
- Filter on the side of the pressure
- Capacitive level control
- Pneumatic pressure release
- Touch screen operating panel
- Rugged sheet steel case
- Double filtration of the inlet side
- Modular electronic system - optionally extensible
- High quality non-stick coating of the tank
Gear pump units (25-50 liters)
- Tank capacity 25-50 liters
- 1 to 8 hose connections
- 1 to 3 gear pumps
- Filter on the side of the pressure
- Capacitive level control
- Pneumatic pressure release
- Touch screen operating panel
- Rugged sheet steel case
- Double filtration of the inlet side
- Modular electronic system - optionally extensible
- High quality non-stick coating of the tank
Bag melters 2 Kg
- One to eight hose connections
- One or two gear pumps
- Large filter on the pressure side
- Level monitoring
- Control display
- Optional touch display
- Optional adhesive pressure display with pressure control
- Stable sheet steel housing
- Double filtering on the suction side
- Modular electronics - optionally expandable
- High quality non-stick coating
Bag melters 20 Kg
- Other sizes available
- One to eight hose connections
- One or two gear pumps
- Large filter on the pressure side
- Level monitoring
- Control display
- Optional touch display
- Optional adhesive pressure display with pressure control
- Stable sheet steel housing
- Double filtering on the suction side
- Modular electronics - optionally expandable
- High quality non-stick coating
Tandem bag melter as described above, however:
- Tandem controls for uninterrupted production
- Intelligent pre-heating
- Central interfaces and power supplies
- Customer-specific integration in higher-level controls
- Simple, practice-oriented operation
- Fully automated
Cold glue deliver unit
Reuther-systems cold glue deliver units guarantee the necessary supply and take care of the necessary pressure.
No matter if you apply a low or high viscous medium.
Our wide range of products enables the realization of different requirements.
Our deliver units are solid and reliable, all components fit perfectly together and enable an optimal production.
Pressure tank
For an economical glue supply of low viscous materials at an operating pressure range up to 6 bar. We offer optionally:
- Pressure tank in stainless steel or synthetic material
- Volume from 1 liter to 40 liters
- Glue level control
- With filters
- Security valve and manual closing valve
- Pressure regulator with manometer
Cold glue deliver system with diaphragm pump
For a continuous glue supply of low and medium viscous materials at an operating pressure range up to 7 bar. We offer optionally:
- Double-membrane diaphragm pump
- 30 liters plastic container
- Completely mounted on a lid with grip
- Liquid level control
- Filters
- Stirring unit
- Security valve and manual closing valve
- Pressure regulator with manometer
- Electronical material pressure regulation
- Hand controlled material pressure regulation
Cold glue deliver system with piston pump
- Completely mounted on a lid with grip and suction tube for hobbocks
- Electronic material pressure regulation
- Manual material pressure regulation
- Liquid level sensor
- Security valve
- Filters
- Closing valves
- Pressure regulator with manometer
Hotmelt application guns
Reuther-Systems offers innovative models for fast and intermittent glue application.
A variety of different single and multiple heads apply the hotmelt by means of dot,- line,- stripes and spray methods.
Rugged manual guns, electro-pneumatic guns or electric guns apply glue in almost all branches around the world.
HM-90X
- Air / spring working gun
- Fast activating times
- Self-cleaning needle with nozzle shutter
- Integrated glue filter that reduces nozzle blockage
- Different nozzle diameters
- 24VDC or 230VAC coil tension
- Short or long nozzle design
- Cost-effective production
- Stable and reliable design
- 25mm narrow design
HM-micro
- Air / air working gun
- Extremly fast activating times
- Self-cleaning needle with nozzle shutter
- Integrated glue filter that reduces nozzle blockage
- Different nozzle diameters
- 24VDC or 230VAC coil tension
- Distance between the modules, quantity of modules and valves free selectable
Special solutions
- Application width up to 2500mm
- Application heads for spray, coating, dot and line application
HM900-FL20
- Electropneumatic hotmelt coating gun
- Air/spring switching area application valve
- One-time adjustable application width up to max. 20mm
- Fast switching times
- Self-cleaning needle with nozzle gate
- Glue filter integrated, reduces nozzle blockages
- 24V DC
Handguns PR2000
- For dot- and / or line application
- Integrated hose connection
- Also available as spray version
- Easy replacement due to pluggable connection
Handguns PR3000
- For dot- and / or line application
- Integrated hose connection
- Isolated hose connection
- Also available as spray version
Cold glue application guns for low and high viscosity cold glues as well as reactive PU-glues
Reuther-Systems offers innovative cold glue guns for a precise glueing at a machine speed up to 1000m/min.
DLK gun serie 400
Electrical cold glue gun for dot- and line application. Extremly rugged stainless steel quality. We offer optionally:
- Short and long nozzles
- Various nozzle diameters
- 6 VDC and 24VDC coil tension
- Various brackets
- Integrated reflective sensor
E-mail inquiry on the topic »DLK valve series 400«
mail@reuther-systems.de
MMDD 20X LV
Electro-pneumatic cold glue gun for dot and line application. Rugged stainless steel quality. We offer optionally:
- Various nozzle diameters
- 230 VAC and 24 VDC solenoid valve
- Various brackets
- Glue pressure up to 25 bar
MMKD 40X LV
Electro-pneumatic cold glue gun for dot and line application. Rugged quality. We offer optionally:
- Various nozzle diameters
- 230 VAC and 24 VDC solenoid coil
- Various brackets
- Glue pressure up to 80 bar
MKDD 10X KV RA
Electro-pneumatic cold glue gun for dot and line application. Rugged quality. We offer optionally:
- Various nozzle diameters
- 230 VAC and 24 VDC solenoid coil
- Various brackets
- Glue pressure up to 100 bar
MKDD coating nozzle
Electro-pneumatic cold glue gun for contact coating application, width from 1mm. We offer optionally:
- Application width up to 2000mm
- 230 VAC and 24 VDC solenoid coil or external control
- Various brackets
- Glue pressure up to 100 bar
MMKD 10X LVM
Electro-pneumatic cold glue gun for spray application, rugged quality. We offer optionally:
- External control
- Air / air switching gun
- Self cleaning needle with nozzle shutter
- Various nozzle diameters
E-mail inquiry on the topic »MMKD 10X LVM«
mail@reuther-systems.de
Controllers
The controllers of LS series were developed to control cold glue and hotmelt application guns, stroke cutters, perforation heads or other Reuther-Systems accessories exactly and reproductible in first-class performance machines.
Controllers are available from 2 - 160 possible controlling channels.
LS-2
The perfect controller for a free programmable control of two channels. This version already offers extensive possibilities and is modular extendible.
LS-4
With 4 free programmable channels most cold and hotmelt application requirements can be done.
LS-8; LS-16...;
The LS-8 control unit is a modular expandable system with 8 glue channels. For the integration of additional control and testing functions for the adhesive application of hot melt adhesive and cold glue, numerous expansion stages can be connected. Up to 80 glue nozzles can be controlled in the extended expansion stage.
Accessories
Reuther-Systems offers the complete accessories to apply glues economically and exactly.
Photocell
Photocells serve to recognize the item that has to be glued as well as the start of the glueing program. Reuther-Systems offers variety of suitable photocells and initiators to be connected to controllers.
Brackets
Reuther-Systems offers a range of suitable brackets to fix safe the glue guns at the machine.
Various fine adjustements and a fast mounting guarantee fastest converting time.
Hot melt hoses
Heated highpressure hoses are available in various diameters and lengths. The isolation is available in synthetic material weave, steel sheathed or water-drop resistant.
High pressure hoses
- Steel sheathed
- Various length
- Various diameters
I/P converter
for hotmelt and coldglue pumps
Material pressure regulator
1:1
1:2
1:5
1:7
Manual pressure regulator
0-7 bar
0-25 bar
0-50 bar
Encoder
with different impulses
Second-hand offers with warranty
On this page you will find our special offers:
For further questions do not hesitate to contact us:
E-mail: sales@reuther-systems.de
hhs 8-channel-controller C-1100
- Second-hand, with warranty
ProBlue 4 / 2-4 exits (Nordson)
- Second-hand
- Cleaned
- With warranty
ProBlue 7 / 2-4 Schlauchanschlüsse (Nordson)
- Second-hand
- Cleaned
- With warranty
Vista 3400 2-6 exits (Nordson)
- Second-hand
- Cleaned
- With warranty
Heated hoses
- Different lengths
- Second-hand
- Cleaned
- With warranty
D-400 gun
- Second-hand
- Cleaned
- With warranty
MMDD gun
- Second-hand
- Cleaned
- With warranty
We also buy your old systems
For further questions do not hesitate to contact us:
E-mail: sales@reuther-systems.de